трабл с процессосм svchost

qton

загрузка 50% постоянно
что может быть, подскажите плз что делать
спасибо

yroslavasako

по имени процесса невозможно узнать, что это за приложение. Напиши на форум командную строку с которой был вызыван svchost

KILLERDED

скорее всего не очень корректно работает система автоматического обновления.
если так, то у меня ситуацию исправляет такое решение

 Solution Turn off automatic updates

reboot

manually go to windows updates and install the updates

turn on automatic updates

reboot. 

 

Solution Perform these steps: 

Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

Double click the service "Automatic Updates".

Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

Click on the tab "General "; make sure the "Startup Type" is "Automatic". Then please click the button "Start" under "Service Status" to start the service.

Repeat the above steps with the other service: Background Intelligent Transfer Service (BITS) 



Re-register Windows Update components and Clear the corrupted Windows Update temp folder 

Click on Start and then click Run



In the open field type "REGSVR32 WUAPI.DLL" (without quotation marks) and press Enter. 

When you receive the "DllRegisterServer in WUAPI.DLL succeeded" message, click OK.

Please repeat these steps for each of the following commands: 

REGSVR32 WUAUENG.DLL

REGSVR32 WUAUENG1.DLL

REGSVR32 ATL.DLL

REGSVR32 WUCLTUI.DLL

REGSVR32 WUPS.DLL

REGSVR32 WUPS2.DLL

REGSVR32 WUWEB.DLL 



 



After the above steps are finished. Since temporary folder of Windows Update may be corrupted. We can refer to the following steps to rename this folder that 

Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window. 

net stop WuAuServ

(note, you might need to reboot before the net stop command will work) 

Click Start, Run, type: %windir% and press Enter.

In the opened folder, rename the folder SoftwareDistribution to SDold.

Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.

net start WuAuServ 

Tatiana09

Celeron?

qton

пень мобильный

Dimon89

Запусти Process Explorer и посмотри, какой именно поток svchost'а занимает ядро.

Tatiana09

Лучше avz --> менеджер служб и драйверов, и посмотреть нет ли лишних dll...