smartctl version 5.38 [i486-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model: ST380817AS
Serial Number: 4MR062XJ
Firmware Version: 3.42
User Capacity: 80,026,361,856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Fri Oct 16 19:23:02 2009 MSD
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 47) minutes.
SMART Error Log Version: 1
ATA Error Count: 621 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 621 occurred at disk power-on lifetime: 6895 hours (287 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 c1 b1 11 e0 Error: UNC 1 sectors at LBA = 0x0011b1c1 = 1159617
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c0 b1 11 e0 00 00:56:47.187 READ DMA
27 00 00 00 00 00 e0 00 00:56:47.187 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:56:47.186 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:56:43.366 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:56:43.366 READ NATIVE MAX ADDRESS EXT
Error 620 occurred at disk power-on lifetime: 6895 hours (287 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 c1 b1 11 e0 Error: UNC 1 sectors at LBA = 0x0011b1c1 = 1159617
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c0 b1 11 e0 00 00:56:47.187 READ DMA
27 00 00 00 00 00 e0 00 00:56:47.187 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:56:47.186 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:56:43.366 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:56:43.366 READ NATIVE MAX ADDRESS EXT
Error 619 occurred at disk power-on lifetime: 6895 hours (287 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 c1 b1 11 e0 Error: UNC 1 sectors at LBA = 0x0011b1c1 = 1159617
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c0 b1 11 e0 00 00:56:35.671 READ DMA
27 00 00 00 00 00 e0 00 00:56:35.671 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:56:35.670 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:56:43.366 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:56:43.366 READ NATIVE MAX ADDRESS EXT
Error 618 occurred at disk power-on lifetime: 6895 hours (287 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 c1 b1 11 e0 Error: UNC 1 sectors at LBA = 0x0011b1c1 = 1159617
Commands leading to the command that caused the error were:
CR FR S
nas1234
контра недавно спрашивал уже.
Gulveig
из под винды отлично читает и расшифровывает smart программка SpeedFan
yolki