XF86 - Grub???

eee1

1. installing XF86 (RH7.3 vga on board (msi sis650) --> use Generic VGA compatible (? and errors as follow:
"Fatal server error: noscreenfound
XIO fatal IO error 104 (connection reset by peer) on X server ":0.0"
Please explain these for me!
2. please send me the file grub.conf (the file was misconfigured so my linux can not boot up)
put the file in this dir ftp://172.16.12.8/share/
Thanks so much!

ppplva

1. Try "vesa" or "sis" driver
2. You can take it from rpm, with rpm2cpio

eee1

1. и vesa и sis не момогло!
2. сейчас я попробую

ppplva

Даешь полный лог.

eee1

log of X server as follow:
my screen Samsung Syncmaster 551s (55-85, 50-120)
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.17-0.13smp i686 [ELF]
Build Host: daffy.perf.redhat.com

Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (?) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Mar 31 21:17:39 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "mon"
(**) | |-->Device "card"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "microsoft"
(**) XKB: model: "microsoft"
(**) Option "XkbLayout" "ru"
(**) XKB: layout: "ru"
(**) Option "XkbVariant" "ru"
(**) XKB: variant: "ru"
(**) Option "XkbOptions" "grp:alt_shift_toggle"
(**) XKB: options: "grp:alt_shift_toggle"
(==) Keyboard: CustomKeycode disabled
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000070, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0650 card 1039,0650 rev 01 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0008 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:02:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:02:3: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:02:7: chip 1039,7012 card 1462,5330 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:0f:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1039,6325 card 1039,6325 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0 (-1,0,0 BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0 (0,1,1 BCTRL: 0x0e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[1] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[2] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[3] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xcc000000 - 0xcc0fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
(II) Bus -1: bridge is at (0:2:0 (0,-1,0 BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) SiS unknown chipset (0x6325) rev 0, Mem @ 0xc0000000/27, 0xcc000000/17, I/O @ 0000/7
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xcc102000 - 0xcc1020ff (0x100) MX[B]
[1] -1 0xcc101000 - 0xcc101fff (0x1000) MX[B]
[2] -1 0xcc100000 - 0xcc100fff (0x1000) MX[B]
[3] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[4] -1 0xcc000000 - 0xcc01ffff (0x20000) MX[B](B)
[5] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[6] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[7] -1 0x0000e400 - 0x0000e47f (0x80) IX[B]
[8] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[9] -1 0x00004000 - 0x0000400f (0x10) IX[B]
[10] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xcc102000 - 0xcc1020ff (0x100) MX[B]
[1] -1 0xcc101000 - 0xcc101fff (0x1000) MX[B]
[2] -1 0xcc100000 - 0xcc100fff (0x1000) MX[B]
[3] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[4] -1 0xcc000000 - 0xcc01ffff (0x20000) MX[B](B)
[5] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[6] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[7] -1 0x0000e400 - 0x0000e47f (0x80) IX[B]
[8] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[9] -1 0x00004000 - 0x0000400f (0x10) IX[B]
[10] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) M

ppplva

Может с конфигом перемудрил ?
Section "Device" / Identifier
совпадает с
Section "Screen" / Device
?

eee1

не знаю, нужен проверить еще
Оставить комментарий
Имя или ник:
Комментарий: